X battery adapter for craftsman V20 lithium battery 18volt 20volt mountable dock

Description

Includes 1 black battery adapter for craftsman V20 lithium batteries
This adaper will ONLY fit the V20 craftsman batteries, your battery must have V20 the marking on it. This will not fit the 20Vmax Die Hard line.
Note:This is not a charger or converter, it only outputs battery voltage and power directly from your battery. You will NOT be able to charge your house or power your vaccume cleaner with this product directly.
Warning: To use this adapter properly, we recommend using a fuse thats rated about 30% higher than the max current you expect to draw.
We also recommend adding a low voltage disconnect circuit or a timer to prevent the battery from dropping past low voltage threshold (which will damage the battery or shorten its life span); (Max battery voltage/4.2)*3.3 = typical low voltage threshold. To protect your device you should convert your voltage using a DCDC converter to match your device's acceptable voltage range. We do not recommend buying this item without fully understanding how to
use it properly, protect the battery, and the device you intend to power.
BATTERY NOT INCLUDED
12 gauge option:
Adapter has 10 inches of 12 gauge wire installed.
10 AWG option:
Adapter has 12 inches of 10 gauge wire installed
3D Printed adapter in outdoor resistant material
Please note: shipping times are dependent on local USPS locations and service selected.
Do not use this adapter to charge your battery
Do not short circuit battery or draw more than 20amps continuous (12gauge), 30amps continuous (10 gauge)
Disconnect the battery before it reaches 15volts, (prolongs battery life)
Do not leave battery charged at 100% for long periods of time, recommended to store battery at 70% charge (prolongs battery life)
[isdntekvideo]