-40%
Silver Solder Paste Extra Easy SS56- ¼” T.O.
$ 8.28
- Description
- Size Guide
Description
Silver Solder Paste Extra Easy SS56- ¼ T.O.Micro-Tools solder paste is a homogeneous blend of micro fine spherical solder powder, flux and binder available in gold, silver, platinum, palladium, copper, and low temperature formulations. The unique properties of paste solder make it perfect for use on, jump rings, in chain manufacture, on hollow items, attaching clasps and earring posts, repair work, and more.
Silver Solder Pastes
Cadmium and indium free solder
Designation (Color)
Flow Point, ºF (ºC)
Melt point, ºF (ºC)
#56 (silver)
1205 (652)
1145 (618)
#65 (silver)
1325 (718)
1240 (671)
#70 (silver)
1360 (738)
1275 (690)
#75 (silver)
1450 (788)
1365 (740)
How To Use Solder Paste
Remove the tip cap. Press and twist the needle onto the syringe.
Save the tip cap.
When not using syringe on the bench for several days remove the needle and replace the tip cap on syringe. Store syringe in a cool place.
Save the needle for further use. Store the needle with the syringe to prevent cross contamination with other paste solders.
Keep the needles clean. If the needle clogs it can be unclogged with a fine wire, or cleaned in an ultrasonic cleaner.
1) Prepare the joint by removing all oil, grease, polishing compound and excessive oxides from the joint area.
2) Joint clearance (gap) should be as small as possible. The joint should be flat, smooth and free of burrs. The two pieces being soldered should touch, as paste solder will not fill large gaps.
3) Apply paste to the top of joint. (To prevent excess flow of solder from the needle after applying solder to the joint, pull back on the hand plunger to relieve pressure.)
4) Apply heat to article
away
from the joint, moving the torch from side to side across the joint to avoid overheating the solder. Allow the piece to heat the paste solder.
D
o not
directly heat the paste solder. (This will cause the paste to “slump” and move away from the joint.) As binder “burns off” and the paste dries you will see the flux spread around the solder. Now move the flame in on the joint area continuing to move the torch from side to side.
5) Remove the flame immediately after solder flows.
6) Pickle with Sparex (R) to remove fire scale and finish the article as usual.
Ideal for precise soldering on rope chain, hollow shells, findings, earrings posts and more
5cc syringe that contains solder powder, flux and binder
Cadmium free
1/4 ounce of 56 silver, extra easy solder paste
Flows at 1205 degrees Fahrenheit
SKU:
SS56-25-SSP
UPC:
014891168602
BRAND:
Micro-Tools
MPN:
SOL-822.05
Manufactured In:
US
International Customers:
We currently only offer international shipping to Canada, Japan, Australia and New Zealand.
International shipping is via USPS First Class Mail which the post office says
should
take 7-14 days but this is not guaranteed.
Offered by Micro-Tools which offers one of the the largest selection of small/precision hand tools on this planet
and support that goes way beyond all other retailers.
Questions? Select the
Ask Seller A Question
in this listing
FREE SHIPPING TO USA ADDRESSES
If you have any questions, PLEASE contact us before making your purchase.
Micro-Tools
a division of Fargo Enterprises Inc
Dixon, CA 95620