-40%
battery adapter for EGO 56V 10 AWG gauge 2ft lithium output dock power connector
$ 18.48
- Description
- Size Guide
Description
Includes 1 black battery adapter for EGO 56 volt Lithium Ion battery3D Printed adapter in outdoor resistant material
*Battery not included*
Adapter has 24 inches of 10 gauge (AWG) wire installed. Wires are marine grade UL rated tinned copper, not low grade copper clad, or aluminum wires.
Note:This is not a charger or converter, it only outputs battery voltage and power directly from your battery.
Note: this adapter does not lock into place you'll have to use your own straps or locks to prevent battery from sliding out.
Warning: To use this adapter properly, we recommend using a fuse thats rated about 30% higher than the max current you expect to draw.
We also recommend adding a low voltage disconnect circuit or a timer to prevent the battery from dropping past low voltage threshold (which will damage the battery or shorten its life span. To protect your device you should convert your voltage using a DCDC converter to match your device's acceptable voltage range. We do not recommend buying this item without fully understanding how to
use it properly, protect the battery, and the device you intend to power.
V0 1/24/2019
initial version
V1 2/8/2020
Added strain relief, now only produced in PETG temperature resistant material, added more reinforcements; now takes 13hours to print 1 unit, increased wire length from 1ft to 2ft
9/15/2020
assembly updates for wires
10/29/2020
Now using premium marine grade UL rated 10AWG
tinned copper
wires.